Marketing Service

Your current location: Home - Marketing Service - Technical Information

Cautions for using color masterbatch?

Pv:Source: Huaxiang PlasticRelease Time:2019-03-13


With the increasing demand for plastic products, in order to produce conveniently and improve the quality, people need only add color masterbatch instead of adding various additives. Because of its special nature, we should pay more attention to the following aspects in the use process:


1. The product will absorb moisture after storage for a period of time, especially PET, ABS, PA, PC, etc. Therefore, it should be dried according to the same process as the original masterbatch and meet the requirement of water content.

2. The selection of dilution ratio should be noted. High dilution ratio will result in lower production cost, but it will also be limited by processing equipment.

3. It is necessary to be very careful to use color masterbatch to achieve the required luster, and changes in color difference and color light often occur.

4. Other additives of the product will react, so be careful when using them.

5. Can't be heated and dried with damp plastics, otherwise it will cause product quality defects.


Through the above description of color masterbatch, we can clearly know what operation is more scientific for our use, so we should pay more attention to these aspects in future use, in order to achieve the desired results.